薄板刚度对点焊接头强度特性影响

本文介绍了三种形状的薄板材料点焊接头试件的拉伸试验及疲劳试验结果,探讨了改变薄板刚度对点焊接头静强度和疲劳寿命的影响。应用断裂力学理论及有限单元法计算焊核周围裂尖各点的应力强度因子K_Ⅰ、K_Ⅱ、K_Ⅲ及有效应力强度因子K_(φθmax),并用这些力学参数分析了不同刚度点焊接头试件的静强度和疲劳寿命。结果表明有效应力强度因子K_(φθmax)是评价拉剪点焊头疲劳寿命的有效力学参数。     

高密度聚乙烯的复合应力蠕变

本文通过实验方法确定多重积分型蠕变方程中的各个时间函数,并在认识材材料非线性粘弹特征的基础上作出合理修正,最后得到适用于单轴及复合应力条件下的蠕变方程。     

Uniaxial extension of an isothermal fluid cylinder in the presence of inertia,surface tension and gravity

Effects of inertia, surface tension and gravity in the constant force stretching of isothermal cylindrical filaments of Newtonian, power-law and Maxwell-type fluids were analysed in Lagrangian coordinates. Solution for the purely gravitational extension of Newtonian fluid cylinder was found to be as simple as = 1 – C ₃ (1 – ) where designates the cross sectional area, the Lagrangian distance and the time. Analytical solutions were also available for the case of inertialess Newtonian and power-law fluids.A first-order backward differencing scheme and minimal computer time were sufficient to numerically analyse the constant force extension of Maxwell-type fluids in the presence of inertia, gravity and surface tension. Effects of inertia, surface tension and gravity on the severity of neck down occurring at either end of the filament are summarized in diagrams. The present approach is valid on any other constitutive model as far as there is a numerical scheme to analyse thehomogeneous extension of a cylinder of that particular fluid.     

3D打印贝壳仿生复合材料的拉伸力学行为

采用硬质和软质双组分材料,通过调控两种基体材料的装配夹角,采用光固化3D打印技术制备了不同装配方式的仿贝壳珍珠层复合材料,开展了准静态拉伸实验,结合扫描电镜观察,分析了其拉伸力学性能、断裂及能量耗散机理。研究结果表明,保持胞元边长不变,随着面内装配角度增加,仿贝壳珍珠层复合材料的强度呈线性增加趋势,断裂应变呈线性减小的趋势;随着面外装配角度增大,断裂应变呈线性减小趋势,而强度在面外装配角小于45°时呈增强趋势,超过45°时趋于稳定;面外装配角度为45°时,材料的强度达到最大值。试样在断裂前主要通过硬质材料的拔出、软/硬相界面处微裂纹的生成及微裂纹在扩展过程中的合并和偏转等方式耗散能量。     

Interface‐fitted moving mesh method for axisymmetric two‐phase flow in microchannels

A boundary‐fitted moving mesh scheme is presented for the simulation of two‐phase flow in two‐dimensional and axisymmetric geometries. The incompressible Navier‐Stokes equations are solved using the finite element method, and the mini element is used to satisfy the inf‐sup condition. The interface between the phases is represented explicitly by an interface adapted mesh, thus allowing a sharp transition of the fluid properties. Surface tension is modelled as a volume force and is discretized in a consistent manner, thus allowing to obtain exact equilibrium (up to rounding errors) with the pressure gradient. This is demonstrated for a spherical droplet moving in a constant flow field. The curvature of the interface, required for the surface tension term, is efficiently computed with simple but very accurate geometric formulas. An adaptive moving mesh technique, where smoothing mesh velocities and remeshing are used to preserve the mesh quality, is developed and presented. Mesh refinement strategies, allowing tailoring of the refinement of the computational mesh, are also discussed. Accuracy and robustness of the present method are demonstrated on several validation test cases. The method is developed with the prospect of being applied to microfluidic flows and the simulation of microchannel evaporators used for electronics cooling. Therefore, the simulation results for the flow of a bubble in a microchannel are presented and compared to experimental data.     

面内双轴应力作用下单层黑磷能带性质研究

通过第一性原理对平面内双轴应力作用下的单层黑磷能带结构进行了计算.双轴拉伸应力作用下单层黑磷始终保持直接带隙性质,双轴压缩应力作用下的单层黑磷则发生了直接带隙转变为间接带隙的现象,当双轴压缩应力增加到7%时单层黑磷带隙闭合.     

Lattice Boltzmann simulation of liquid–vapor system by incorporating a surface tension term

In this study,we investigate the pseudopotential multiphase model of lattice Boltzmann method(LBM)and incorporate a surface tension term to implement the particle interaction force.By using the Carnahan–Starling(CS)equation of state(EOS)with a proper critical pressure–density ratio,a density ratio over 160000 is obtained with satisfactory numerical stability.The added surface tension term offers a flexible choice to adjust the surface tension strength.Numerical tests of the Laplace rule are conducted,proving that smaller spurious velocity and better numerical stability can be acquired as the surface tension becomes stronger.Moreover,by wall adhesion and heterogeneous cavitation tests,the surface tension term shows its practical application in dealing with problems in which the surface tension plays an important role.     

Effect of fluid properties on ultrasound assisted liquid-liquid extraction in a microchannel

When immiscible liquids are subjected to an ultrasonic field, they form emulsions. This principle has been used to improve the mass transfer characteristics of a liquid-liquid extraction process in microreactor systems. The formation of emulsion and its characteristics are prominently dependent on the properties of the liquids used and this also holds true for emulsion brought about by ultrasound. This paper focuses on the properties of fluids that are reported to have an influence on the cavitation behaviour, namely viscosity, interfacial tension and vapour pressure. These properties were examined by changing the solvent of the organic phase in the hydrolysis of p-nitrophenyl acetate. The study is performed by comparing pairs of solvents that are different in one property but similar in the other two. The pairs selected are toluene – chlorobenzene for viscosity, toluene – methyl Isobutyl ketone for interfacial tension and methyl isobutyl ketone – 2-Methyl tetrahydrofuran for vapour pressure effects. A qualitative study was performed with a high-speed camera in flow to understand the emulsification initiation mechanisms and behaviours. These findings were further explored by performing the sonicated emulsion in a batch-sonicated reactor. The quantitative analysis of the fluid properties was evaluated and compared based on the relative percentage increase in yield upon sonication with respect to their individual silent conditions. The quantitative results were further supported by the quantification of the emulsion performed with an FBRM probe. The results indicate a two times improvement in yield with solvent of lower viscosity as 2 times more droplets were formed in the emulsion. Both the solvent systems with higher interfacial tension and vapour pressure had an improved yield of 1.4 times owing to larger number of droplets formed.     

Effect of surface condition on liquid crystal photoalignment by light-induced azo dye adsorption phenomena

The effect of surface condition on the photoalignment of light-induced methyl red (MR) adsorption phenomena on various substrates based on azo dye-doped liquid crystals is investigated. The results show that the polar surface energy determines the initiation of MR adsorption phenomena. The surface polarity energy of different substrates, which are modulated by oxygen plasma treatment (OPT), is further examined using the sessile drop method. The results also indicate that the uniformity and efficiency of MR adsorption can be enhanced by OPT. Light intensity influences the MR adsorption rate. The uniformity of MR adsorption onto various substrates is analysed via polarised optical microscopy.     

Many-body and quantum effects in the surface tension and surface energy of liquid neon and argon using the Fowler’s approximation

The Fowler’s expression for calculation of the reduced surface tension and surface energy has been used with Lennard-Jones (LJ) and two-body Hartree-Fock dispersion (HFD)-like potentials for neon and argon, respectively. The required radial distribution functions (RDFs) have been used from two recently determined expressions in the literature and a new equation proposed in this work. Quantum corrections for neon system have been considered using the Feynman-Hibbs (FH) and Wigner-Kirkwood (WK) approaches. To take many-body forces into account for argon system, the simple three-body potentials of Wang and Sadus (2006) [33] and Hauschild and Prausnitz (1993) [30] used with the HFD-like potential without requiring an expensive three-body calculation. The results show that the quantum and three-body effects improve the prediction of the surface tension of liquid neon and argon using the Fowler’s expression.